Free geotechnical calculators.
Bearing capacity, settlement, consolidation, SPT correction, plate load, earth pressure, liquefaction, response spectra, Atterberg limits and sieve analysis, to Eurocode, ASTM, AASHTO, BS and IS. They run the same engines TerraBrains runs inside a project. Every result names the clause it comes from, and every page re-runs published worked examples so you can see our number beside the printed one.
Calculators
10
No account, no install
Published worked examples
47
Re-run live, with the tolerance shown
Methods and standards
29
Eurocode, ASTM, AASHTO, BS, IS
Price
$0
PDF sheet with a free account
All calculators
Bearing capacity
- European standard (Eurocode / EN / ISO): EC7
- US standard (ASTM / AASHTO / ASCE): AASHTO LRFD
- British Standard: BS 8004
- Indian Standard (BIS / IRC): IS 6403
Ultimate, net safe and allowable pressure for shallow footings.
6 published worked examples, checked live on the page
SPT N correction
- Published method: Youd 2001
- Published method: Liao-Whitman 1986
- Published method: Skempton 1986
- Indian Standard (BIS / IRC): IS 2131:2025
Correct field N for energy, overburden and dilatancy.
5 published worked examples, checked live on the page
Foundation settlement
- Published method: Terzaghi 1-D
- Published method: Boussinesq
- Published method: Steinbrenner
- Indian Standard (BIS / IRC): IS 8009-1
Immediate, consolidation and secondary settlement of layered soils.
6 published worked examples, checked live on the page
Consolidation settlement & time
- Published method: Terzaghi 1-D
- Published method: e–log σ′
- Indian Standard (BIS / IRC): IS 8009-1
Layered-clay settlement and time to a target degree of consolidation.
4 published worked examples, checked live on the page
Plate load test
- Indian Standard (BIS / IRC): IS 1888:1982
- Indian Standard (BIS / IRC): IS 1904
Safe pressure, subgrade modulus and settlement from plate readings.
5 published worked examples, checked live on the page
Earth pressure
- European standard (Eurocode / EN / ISO): EC7
- US standard (ASTM / AASHTO / ASCE): AASHTO LRFD
- Published method: Mononobe-Okabe
- Indian Standard (BIS / IRC): IS 14458
Wall coefficients and thrust, including groundwater and seismic demand.
6 published worked examples, checked live on the page
Liquefaction (SPT)
- Published method: B&I 2014
- Published method: NCEER 2001
- Published method: Cetin 2004
- Indian Standard (BIS / IRC): IS 1893-1:2016
CSR vs CRR and FoS at each SPT depth, with fines correction and magnitude scaling.
5 published worked examples, checked live on the page
Design response spectrum
- US standard (ASTM / AASHTO / ASCE): ASCE 7-16
- European standard (Eurocode / EN / ISO): EC8
- Indian Standard (BIS / IRC): IS 1893-1:2016
Sa(T) by code: ASCE 7-16, Eurocode 8 or IS 1893-1:2016, with the site class from Vs30.
5 published worked examples, checked live on the page
Atterberg limits
- US standard (ASTM / AASHTO / ASCE): ASTM D4318
- British Standard: BS 1377-2
- US standard (ASTM / AASHTO / ASCE): ASTM D2487
- Indian Standard (BIS / IRC): IS 2720-5
LL from the flow curve or cone, PL, PI and the USCS group on the plasticity chart.
2 published worked examples, checked live on the page
Sieve analysis
- US standard (ASTM / AASHTO / ASCE): ASTM D6913
- US standard (ASTM / AASHTO / ASCE): ASTM D2487
- Indian Standard (BIS / IRC): IS 2720-4
Percent passing, D10/D30/D60, Cu, Cc and the gravel–sand–fines split.
3 published worked examples, checked live on the page
Save it, sign it, keep it current.
A free account saves the result to a project with its PDF calculation sheet, and carries the clause into a signed report your client can verify. The same engines run 233 analyses and 47 lab tests inside. 14 days free, no card.