Skip to main content
ASCE 7-16 · EN 1998-1 · IS 1893 (Part 1):2016

Design response spectrum calculator — ASCE 7-16, Eurocode 8 and IS 1893

Design spectral acceleration Sa(T) for a site — ASCE 7-16 §11.4, Eurocode 8 (EN 1998-1 §3.2.2.2) or IS 1893 (Part 1):2016 Cl 6.4.2, with the site class from Vs30, behind one selector.

Free · no signup · computed in your browser by the engine TerraBrains runs in the app.

Inputs

Illustrative inputs are loaded to demonstrate the method. Replace them with your measured project data before interpreting results.

Keep this calculation

Free here. In TerraBrains this result is saved to the project, carries its clause into a signed report your client can verify, and updates when the borehole does.

Log the borehole this came from — the TerraBrains field app on iPhone, iPad and Android works offline on site and syncs the SPT, samples and layers to the same project.

Worked examples — checked live

Each example comes from a published source. Its inputs run through the same engine as your calculation above; a ✓ means our value is inside the tolerance stated for that example. Load one to see it in the form.

IS 1893:2016 — Zone IV (Z = 0.24), Type II medium soil

Source: IS 1893 (Part 1):2016, Table 3 (Z = 0.24, Zone IV) and Cl 6.4.2(b) (Sa/g = 2.5 for 0.10–0.55 s; 1.36/T for 0.55–4 s; 1 + 15T below 0.10 s)

4/4 within tolerance

Vs30 = 250 m/s is used only to select soil Type II. For Ah multiply by I/R (e.g. I = 1, R = 5 ⇒ Ah = 0.06 on the plateau).

QuantityPublishedOursΔWithin tolerance
Sa at T = 0 (ZPA) = Z/2 (g)0.12000.12000.00 %✓
Sa at 0.2 s (plateau) = (Z/2)·2.5 (g)0.30000.30000.00 %✓
Sa at 1.0 s = (Z/2)·1.36/1.0 (g)0.16320.16320.00 %✓
Sa at 2.0 s = (Z/2)·1.36/2.0 (g)0.08160.08160.00 %✓

Tolerance: ±0.01 % (Exact: printed coefficient × Z/2.)

Questions engineers ask

How is the IS 1893 soil type chosen?

It is inferred from the Vs30 you enter — 375 m/s or more Type I, 180–375 m/s Type II, below 180 m/s Type III — and reported beside the result. IS 1893 Table 4 itself classifies by soil description and SPT N, so check the inferred type against your borehole log.

Does this include the zone factor, importance and response reduction factors?

For IS 1893 the values reported are (Z/2)·(Sa/g) — the design horizontal acceleration Ah with I/R = 1 (zone IV, Z = 0.24, gives a plateau of 0.30 g). Importance factor I and response reduction factor R belong to the structure, so multiply by I/R for yours: Ah = (Z/2)·(I/R)·(Sa/g).

Which Eurocode 8 spectrum shape is used?

Type 1 by default; choose Type 2 where the earthquakes contributing most to the hazard have Ms ≤ 5.5 (EN 1998-1 §3.2.2.2(2)P NOTE). Ground type E is defined by profile geometry, not Vs30, so it is selected explicitly.

All ten calculators

Save it, sign it, keep it current.

A free account saves the result to a project with its PDF calculation sheet, and carries the clause into a signed report your client can verify. The same engines run 233 analyses and 47 lab tests inside. 14 days free, no card.