Skip to main content
Research · Constitutive methods

The Collapse Load of a Non-Associated Frictional Soil

When a frictional soil dilates less than it rubs (ψ < φ), its collapse load need not be unique. The limit theorems still certify a bracket. Every single number inside it — ours included — is an estimate.

TerraBrains Research · 26 October 2026 · updated 1 November 2026

1 ≤ Nq ≤ 10.74
certified bracket (ψ = 0)
10.66
exact value with associated flow (Prandtl)
8.58
Davis — an estimate; a bound only if collapse is by sliding blocks
≈ 10.0
Potts & Zdravković FE (ψ = 0, 10.03) — an estimate

The result on one axis

Weightless, cohesionless strip footing, φ′ = 25°, ψ = 0, surcharge 100 kPa, B = 2 m, smooth. Nq = collapse pressure / surcharge. Shaded: what is proved. Ticks: estimates and the associated reference.

The problem

Real frictional soils flow with a dilatancy angle ψ smaller than their friction angle φ. With such non-associated flow the equations can lose ellipticity at failure (Vermeer & de Borst, 1984) and the collapse load need no longer be unique: no theorem guarantees one value for a given soil, footing and load path (Radenković, 1961; Salençon, 1977), and computed limit loads depend on the initial stresses and the loading sequence (Vermeer & de Borst, 1984). A finite-element program will always print a number. The question is which statements about that number can be proved.

What is certified

Upper bound. A non-associated soil cannot be stronger than the same soil with associated flow (Radenković, 1961; Drescher & Detournay, 1993). We compute the associated upper bound by finite-element limit analysis, which yields a rigorous bound when its optimisation is solved to full tolerance: Nq ≤ 10.74 here, against the exact associated value 10.66.

Lower bound. Radenković’s theorem bounds the collapse load from below by that of a fictitious associated material whose yield surface is the soil’s plastic potential (Salençon, 1977, Appendix V.A). For ψ = 0 that material is a liquid, so the theorem gives Nq ≥ 1 and no more. For 0 < ψ < φ the same construction gives a sharper, computed lower bound: on this footing 2.4679 ≤ Nq ≤ 10.735 at ψ = 10°, and 10.6152 ≤ Nq ≤ 10.735 at ψ = φ = 25°, where the exact associated value is 10.6621.

So for ψ = 0 the certified statement is 1 ≤ Nq ≤ 10.74. It is wide because the physics is: no classical limit theorem pins the ψ = 0 collapse load closer.

What we proved next (1 November 2026)

The lower value 1 cannot be improved by the theorem. Radenković’s theorem allows any comparison material that meets its conditions, not only the plastic potential. We show that for a cohesionless soil with ψ = 0 every admissible comparison material is a liquid, so no choice gives more than Nq ≥ 1. Salençon (1977, Ch. V §8.3) called the theorem too conservative for this case; it is exactly as conservative as it looks. A sharper lower bound needs an assumption about how the soil collapses.

Two conditional lower bounds. If the soil collapses by rigid sliding blocks, Nq ≥ 8.58 — Davis’s value, which is a bound within that class only (Drescher & Detournay, 1993). If the mean effective stress stays at least the surcharge wherever the soil deforms, Nq ≥ 3.17. Our own computed collapse fields show the mean stress falling close to zero at the footing edge, so the second assumption does not hold there; neither bound is claimed for this footing.

Open. Whether any bound above Nq = 1 holds with no assumption about the collapse mechanism is, as far as we can find, an open question.

What is estimated

ResultNqStatus
Upper bound — associated flow, finite-element limit analysisNq ≤ 10.74Certified
Lower bound — Radenković’s theorem (ψ = 0)Nq ≥ 1Certified (exact)
Associated-flow exact value (Prandtl 1920)10.66Reference (ψ = φ only)
Davis (1968) reduced strength, tan φ* = sin φ8.58Estimate; a bound only if collapse is by rigid sliding blocks
Potts & Zdravković (2001) Vol. 2 FE, ψ = 0, smooth (Table 6.1)10.03Estimate
TerraBrains regularised FE, two independent settings10.3 – 10.6Estimate

Davis’s reduced strength is exact only for mechanisms made of sliding rigid blocks (Drescher & Detournay, 1993); outside that class it is a useful engineering estimate, not a bound. Regularised finite-element models give values that depend on the regularisation: ours, at two independent fixed settings, give 10.3 – 10.6, and weaker settings give lower values. Run on the associated case, where the exact answer is known, the same two settings come out 2 – 8 % high — so read 10.3 – 10.6 as an upper-leaning estimate. We do not claim a limit of vanishing regularisation: on affordable meshes it does not converge. We do not claim a single certified collapse load for non-associated flow, a convergence rate, a mesh-converged finite-element limit, or an error bound on these estimates.

On TerraBrains

The certified bearing-capacity analysis returns, for a rigid strip on Mohr–Coulomb soil with 0 ≤ ψ ≤ φ (any cohesion, unit weight and surcharge): the certified bracket and the problem domain it holds for; the Davis estimate; the regularised estimates with whether each one is mesh-converged; and the exact associated value where one exists. It runs on the TerraBrains compute tier, from any project's Bearing capacity analysis (Certified bracket).

References

  • Radenković, D. (1961). Théorèmes limites pour un matériau de Coulomb à dilatation non standardisée. C. R. Acad. Sci. Paris 252, 4103–4104.
  • Salençon, J. (1977). Applications of the Theory of Plasticity in Soil Mechanics. Wiley. Ch. V §8.3 and Appendix V.A §3.
  • Davis, E. H. (1968). Theories of plasticity and the failure of soil masses. In Soil Mechanics: Selected Topics, Butterworths.
  • Drescher, A. & Detournay, E. (1993). Limit load in translational failure mechanisms for associative and non-associative materials. Géotechnique 43(3), 443–456.
  • Vermeer, P. A. & de Borst, R. (1984). Non-associated plasticity for soils, concrete and rock. Heron 29(3).
  • Potts, D. M. & Zdravković, L. (2001). Finite Element Analysis in Geotechnical Engineering: Application. Thomas Telford. §6.5.4.4, Table 6.1 (p. 232).
  • Prandtl, L. (1920). Über die Härte plastischer Körper. Nachr. Ges. Wiss. Göttingen, 74–85.

Run the bracket on your own footing.

The analysis described above runs from a project's Bearing capacity analysis. Start free and try it with your own soil.